Post by nelson on Mar 15, 2016 23:17:48 GMT -5
Using the plans from rqriley.com/tri-mag.html, I built one but I decided not to enclose the bike; The front end is from a 72 0r 74 VW Beetle. The bike is a 82 KZ1000. If you go to the website you can see how the body is made rqriley.com/frp-foam.htm I tried to add a few pictures but it limited the number. I originally built the body so that the height was higher than the plans because of headroom problems. When I went to register it I was told that the windshield had to be safety glass because the lexan was attached on all sides so I cut the top down to plan height and left the lexan unattached on the top so it could be flexible.
Attachments:
