|
JZR
Jun 18, 2011 2:50:06 GMT -5
Post by scooterrebel on Jun 18, 2011 2:50:06 GMT -5
I got a hold of Bill Todd for a current price and options for the Morgan replica. Here is what he sent me. Chassis Kit $8,995.00 - $9495.00 Total build cost is estimated at $16,000.00
|
|
|
JZR
Jun 19, 2011 9:31:54 GMT -5
Post by 1983JZR3W on Jun 19, 2011 9:31:54 GMT -5
That's pretty accurate. I have just a bit over 17K in my JZR.
|
|
|
JZR
Jun 20, 2011 11:39:26 GMT -5
Post by scooterrebel on Jun 20, 2011 11:39:26 GMT -5
I saw a Morgan at a museum, it looked like it was about 6 or 7 feet long. Do you have the actual size of it? That is the length and width of the chassis.
|
|
|
JZR
Jun 21, 2011 17:31:54 GMT -5
Post by 1983JZR3W on Jun 21, 2011 17:31:54 GMT -5
My car is 60 inches wide at the front wheels and 118 inches overall length. I believe the Morgan Areo Sport to be just about the same size. You can get the exact deminsions from one of the Morgan three wheeler site.
|
|
|
JZR
Jun 21, 2011 17:55:25 GMT -5
Post by scooterrebel on Jun 21, 2011 17:55:25 GMT -5
I've had trouble finding any Morgan sites with measurements. Thanks
|
|
|
JZR
Jun 21, 2011 20:10:48 GMT -5
Post by 1983JZR3W on Jun 21, 2011 20:10:48 GMT -5
I will see what I can find for you and post the results.
|
|
|
JZR
Jun 22, 2011 3:47:35 GMT -5
Post by srx660 on Jun 22, 2011 3:47:35 GMT -5
Morgan had a standard wheelbase at 72 inches with a width of 50 inches. This was set in 1923. Many models built in later years had slightly longer wheebases to adjust to body styles.
SRX660
|
|
|
JZR
Jun 22, 2011 13:46:37 GMT -5
Post by scooterrebel on Jun 22, 2011 13:46:37 GMT -5
Thanks, so my guess was fairly close.
|
|