Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 3, 2013 22:18:31 GMT -5
HI GUYS! I am knew to this thread. I have recently decided to build a T Rex trike clone. I will be using the plans from the guy in this you-tube clip. www.youtube.com/watch?v=shHTLtUhSAUI want to make this look a lot like the t rex because I love how it looks. These plans cost quite a bit of money and I was wondering if there is someone who made plans like these and if it is open source. I already have a kawasaki z750 for this build and i have ordered dom tubing. I am having problems picking things for front suspension. i decided to use the Mustang II spindles. I want to use as many off the shelf parts as possible. Anybody know of any good a arms to use? Hope for some replies! thanks! ;D
|
|
|
Post by stretchmobileski on Jun 3, 2013 23:18:49 GMT -5
|
|
|
Post by mtntech on Jun 9, 2013 10:13:13 GMT -5
How much do the plans cost?
|
|
|
Post by DaveJ98092 on Jun 9, 2013 13:34:40 GMT -5
Paul Horton's Welder Series is a good "M-II" source too. He even has a FREE subframe Deminsion chart you can copy and cut your own 11 gauge steel and weld it up yourself. www.welderseries.com/blog/
|
|
|
Post by dunefugly on Jun 18, 2013 12:58:43 GMT -5
Hello, I used all Willwood Mustang2 components from Summit Racing. Bought a set of Mustang2 control arms from an ebay site.Made my own chassis which allowed me to go much wider than the Mustang2 crossmembers. In my experience; a good handling reverse trike will need a wide and stiff front suspension with a well engineered anti sway bar. Mustang2 arms are available for coil-over shocks. You will probably want to use coil-over shocks. You will not have a T-Rexx clone with Mustang control arms?
|
|