Post by dennis on Nov 22, 2012 9:10:18 GMT -5
HI from new Mexico. i have used a vw front beam on a gl1000 goldwing. it is very stable but has a 60 inch width. I'm in the process of narrowing a vw front beam 5 inches with adjusters in it. i found the ride on the 1000 a little stiff ,so Ive removed some of the torsions leaves from this. My plan is to make a bolt on affair for the gl1800 goldwing. i plan to come from the foot peg brackets out to the front beam. the voyager kit i have now attaches there. then bars back to the alum frame will be bolt on.
I chose the vw beam 1970 with ball joint for its simplicity, no need to fad arms
I chose the vw beam 1970 with ball joint for its simplicity, no need to fad arms